Lets see some dropped C1500s

[Javlin42]

That drag set up is perfect! Great job measuring. Do you mind sharing the specs for the wheels? Is the rear end narrowed?

I appreciate it. The rear is a 17x10 with a 4" bs, and still have plenty of room on the inside. Yes the rear is narrowed 4" total (2 per side). Stock rear width on a 2wd, you can run a 10 wheel with 6.5 bs
Front wheel is a 18x6 with a 3.5 bs

+1 on the drag wheel questions. 5x5 drag wheels are not common apparently.

No, i wasn't able to find many options that I liked.

 

[OBSOkie]

Here’s mine. 4/6. Need to do the notch.

 

[Carmela_obs]

Here’s my bucket, a lot left to do but steady grinding on this build. Follow the progress on here (https://www.gmt400.com/threads/garage-custom-little-bit-of-this-and-that.63794/) or Instagram (carmela_obs)

Started out with 4/6 now down to about 6/8.. StoneFab upper and lower tubular arms, Aldan Coilovers, McG spindles, flip kit/shackles and adjustable shocks. Running a square 295/50/15s setup

You must be registered for see images attach

You must be registered for see images attach