Post your lifted 2wd's!

[Silversilverado92]

Damn.. And here I am trying to lower my 4x4 lol.


Sent from my iPhone using Tapatalk

 

[SLmateo]

Anyone know where to buy HUB centric spacers?

 

[95C1500]

88GMCTruck knows of a place. I don't know if he checks this thread so you might want to pm him

 

[SLmateo]

Thank you... found some on e bay with correct center bore but might want 1.5 for front (can't find) and 2" for back.

 

[95C1500]

Thank you... found some on e bay with correct center bore but might want 1.5 for front (can't find) and 2" for back.

first off, no ebay spacers lol. 2nd, 2" in the back should bring the back about equal to the front

 

[SLmateo]

Saw one guy in here with 2inch spacer in both look pretty good even though more out in front. T6016 so seems good quality even if on ebay lol. If he messages me I'll prob get somewhere else if reasonable though.

 

[Torchred]

Saw one guy in here with 2inch spacer in both look pretty good even though more out in front. T6016 so seems good quality even if on ebay lol. If he messages me I'll prob get somewhere else if reasonable though.

I'm on 2" spacers all around but my wheels have 7" of back spacing and a lot of positive offset. I do have ebay spacers but I check them religously, and they have loctite on the inner lugnuts, antiseize on the wheel side lug nuts.

 

[Steve's Chevy]

Lol, I've been running "ebay" spacers for almost 4 years now. Just 1.5" in the rear . No prob......

 

[SLmateo]

Hey guys I'm looking for hubcentric DTD says 78.1 other sites say 78.3 yall know which is correct?

Planning on doing the same... red lock tight and checking every once in awhile.... might do blue on the outer too as well.

 

[95C1500]

78.3 sounds familiar. Wait for someone who knows to chime in though