the more my grandpa looks at my engine and looks at my heads. he is thinking that they might be mismached. he also took a little bit closer look at the motor and it is an older small block. it has 2 piece seal instead of newer style 1 piece. so this motor is not going to stay in the truck. i am going to build one of the many small blocks he has in his shop when ever i go to do the build. that is later down the line. cause this engine runs just fine the way it is.
so now this is going to be my new plan for my later on motor build. i am going to be using a late 80s 350. it will not be machined, i will be using vortec heads from a 98 tahoe, edlebrock performer intake for vortec to carb, and im thinking a RV cam from comp cams, not sure on that yet. i am going to put the full serpentine belt systems like was on it from the factory. not sure on distributor and all that mess yet as i dont really know much about it. i already have a 1406 600cfm edelbrock carb that i am going to rebuild just so everything is new. i am going to make sure that everything is done right since its not right now. also am going to get my a/c hooked up. i am hoping to run dual efans down the line. not sure when all this will be done as i am still in the midst of body work for paint. anything yall want to add to what i have decided on. maybe some pointers and some advice on the ignition system as in what distributor. what would yall run.