Mufflers

[bobfig]

if your going to get a flowmaster 40 then just get the knockoff thrush welded as its exactly the same for $30 less. if you want to spend the extra money tho get the spintech as its designed to flow better and still has a similar chambered sound. i recommend going with duel 2.25" in and a single 3" out to give it a deeper tone that the 3" pipe gives. now if your running tips dont go with anything smaller them 3.5"D 18" long.

stupid question but does cats/ no cats and y pipes/ other junk make it sound any different than just stock cats and piping witha muffler?

long tubes will make it louder and flow a lot better. cat's help muffle some sound and pop. its best to just keep them to stay legal.

 

[95C1500]

I'm doing stock 2 1/4" with the muffler and stock tailpipe

 

[bobfig]

http://www.summitracing.com/parts/wlk-17637/overview/

 

[95C1500]

Great price, but I'm still going Flowmaster Super 40.
This is the sound I'm going for:
http://www.youtube.com/watch?v=ZbrqOIqqKEQ

 

[95C1500]

Ok so the muffler above ^ has a 13" case and is 19" overall. I measured the stock muffler to be 21". What do I need to do to make it fit properly?

 

[Gatorboy]

If you're not going to weld it get clamps and a couple extensions from an auto parts store and cut them to size it's easy.

 

[95C1500]

ok, I was just wondering which option would be best.

 

[Gatorboy]

Welding is best but if you don't have access to a welder use clamps and extentions. Do not use flexable exhaust tubing

 

[95C1500]

didn't plan on it. I don't have access and i don't want to pay a shop to do it. I wanted to do it myself.

 

[GMCTRUCKS]

http://youtu.be/QjD8OsBtkXQ

Magnaflow one in two out with free flowing Magnaflow Cat.