L31 intake swap-I am actually doing it not a question.

[SixSpeedSS]

Subscribed. Would like to know how this turns out.

How about an aftermarket TB?

 

[1998regcab]

Subscribed. Would like to know how this turns out.

How about an aftermarket TB?

I considered it. But for a couple reasons I didn't; as of right now I don't need to flow more air than the stocker can, also I don't want to mess with getting the all the sensors and cables to work on an aftermarket TB, and I don't really want to spend the money on an aftermarket TB right now. If I ever put the motor under some pressure I might.

 

[Jorge6.5]

Very cool. I read though both your build threads over at FSC. Nice work, keep it up!

 

[DRAGGIN95]

Cool build!

 

[1998regcab]

Very cool. I read though both your build threads over at FSC. Nice work, keep it up!

Cool build!

Thanks guys!

Did a little more tonight, cleaned and polished the throttle body. I will order more parts in the morning when my check hits. I am waiting until I have all the parts for the intake before I start drilling holes and making brackets and what not.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Almost too pretty to run... almost.

 

[Big D]

very interested i how this Intake setup turns out... Looks great man.

 

[1998regcab]

very interested i how this Intake setup turns out... Looks great man.

Thanks man!

LS2 injectors are on their way now.

 

[1998regcab]

So what size fuel lines to I need? 3/8" is what I am thinking, which is -6AN correct? Capped off with these fittings http://www.summitracing.com/parts/rus-612180.

 

[Whipped96]

Check out this link for the marine intake swap if you haven't seen it.
I got all the info for my marine swap form here, it will probably give you some help.

http://www.pacificp.com/forum/viewtopic.php?t=317&start=0&sid=400ae30d33e6c760f09e9ed0e2bf0771

 

[98slv]

Sub'd