intake resonator capped
You must be registered for see images attach
picked up a working CHMBL from the junkyard
You must be registered for see images attach
and a cupholder (finally! been looking for over a year), fog light switch, 12V outlet, and a reel light, and GMT800 wiper mounted washer nozzles
You must be registered for see images attach
You must be registered for see images attach
reel light mounted
You must be registered for see images attach
florida edition emblem from a crown vic
You must be registered for see images attach
started the GMT800 nozzles
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
zip ties are temporary
You must be registered for see images attach
You must be registered for see images attach
how to remove the washer tank (with the storage tray)
10 mm bolt
You must be registered for see images attach
13mm bolt
You must be registered for see images attach
clips
You must be registered for see images attach
7mm bolt
You must be registered for see images attach
10mm bolt, then **** on the tank really hard to get it out (dont pull on the filler neck!)
You must be registered for see images attach
hole drilled where the rear washer pump would go if I had a tailgate/hatch. Be careful where you drill so that the tank can go back in the tight spot.
You must be registered for see images attach
nipple and glue
You must be registered for see images attach
line
You must be registered for see images attach
this is the pump I got from an early 90s nissan pathfinder
You must be registered for see images attach
the pump didn't work so I just added a T fitting to the factory line
You must be registered for see images attach