Cokeman95
I'm Awesome
Guy I purchased them from had first dibs if I didn't like them. He bought them back.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Sent from my SAMSUNG-SM-G900A using Tapatalk
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Wait, now that I think about it I have seen the dark blue one.I know there's two pewter Z71s I see at WalMart all the time, and there's a dark blue one I saw pulling into RCCC when I went by there yesterday.
I just listed a set in the for sale forum.Boooooooooooo.
Could've moved on down the line to me
That looks very clean! Did you cut off the top mounts for the fans? I had the idea of doing something similar with the factory plastic shroud. And did you use the factory 05-07 harness?Looking good! A cover plate is easy to make. I just bent a piece of sheet metal and used the radiator bracket holes to hold the cover. I can get more pics of mine if you need/want them.You must be registered for see images attach
Sent from my SAMSUNG-SM-G900A using Tapatalk
Thanks. I did cut the top mounts off the fans. I used the factory wiring for the fans.i didn't have to modify or extend the wiring at all. I would recommend upgrading your cables and such if you haven't. The fans pull some power. I have the fan fuse box sitting under my pcm. You're running the 411, correct? If so it'll control both fan triggers, you'll just need to pin the wires in the correct spots.That looks very clean! Did you cut off the top mounts for the fans? I had the idea of doing something similar with the factory plastic shroud. And did you use the factory 05-07 harness?
Sent from my SM-S727VL using Tapatalk
Okay, I like that! Where did you pull an ignition hot from and for the ground would it be okay to run it to the battery?Thanks. I did cut the top mounts off the fans. I used the factory wiring for the fans.i didn't have to modify or extend the wiring at all. I would recommend upgrading your cables and such if you haven't. The fans pull some power. I have the fan fuse box sitting under my pcm. You're running the 411, correct? If so it'll control both fan triggers, you'll just need to pin the wires in the correct spots.
Sent from my SAMSUNG-SM-G900A using Tapatalk