2000 K3500 4x4 CC DRW

[Christian Steffen]

Would anyone happen to know (88GMCTruck? ) if this cloyes double roller will fit without modifications?
https://www.summitracing.com/parts/...r/2000/make/chevrolet/model/k3500?prefilter=1

I know I'm running a double roller, don't remember any issues with it.

 

[cool_as_crap]

I know I'm running a double roller, don't remember any issues with it.

Awesome, thank you!
I'll try it out.

 

[Supercharged111]

I just took the easy way out and ordered a new AC Delco fat single roller chain and reused the gears which were fine.

 

[cool_as_crap]

I'm getting closer to the finish.

Though when trying to install the rocker arms the poly locks are maxed and still have a ton of play in the pushrods.
I'm going to call comp when they're open, but does this look like I need longer pushrods?

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[cool_as_crap]

It's in.
*bites lip*

You must be registered for see images attach

 

[Supercharged111]

That's what she said. Why'd you yank so much off the truck for that?

 

[dylan5299]

That's what she said. Why'd you yank so much off the truck for that?

It does make for a good picture

 

[cool_as_crap]

That's what she said. Why'd you yank so much off the truck for that?

I was on the fence about pulling the tranny out with it but was worried about clearance to my garage door which slides overhead.
I had a friend come over to help since this was my first engine pull, I didn't want to waste time if we went that route.

 

[cool_as_crap]

I got my pushrod checkers yesterday, i'm going to check length later today.
The temp is finally starting to drop around here so i'll be more motivated to work on it, too bad it had to be 105 when we installed the engine

 

[cool_as_crap]

I learnt how to actually set valve lash and determined my pushrods are good length

Should be ready to start Saturday morning, still waiting on a few remaining parts to come in the mail.