Yup exhaust leak, what you described is to the letter how mine was. For me it ended up being 4 small holes in the intermediate pipe and 1 big one where a exhaust hanger rusted off where it was welded. Good luck exhaust work is a p.i.t.a haha
My friend who works at the junkyard is supposed to call me if one rolls thru, but if that doesn't pan out I PM you Devs, thanks. And my truck is currently the 4.3 :(
I wanted to swap to a cluster with a tach, but so far no luck finding one. I went to the only pick and pull around here that I know of 3 times and so far no luck. I've found tons of moonie style cluster and 95+ style ones but none like mine.
I have a 94 that has an instrument cluster without a tach, is it true that getting a cluster from a 92-94(I believe those are the years with same style clusters) that has a tach is just plug and play and it will work?
Yea it's a aftermarket lockup harness for the 700r4 that locks up the TC by vacuum pressure. I didn't have the harness and computer that came with the 91 to put in my 94 so I had to use a lockup harness. I'll have to check but I thought all the vacuum ports had something going to them after I...
I'm in the final stages of hooking my lock-up harness for my 700r4. It controls lock-up by vacuum and I wanna know a good spot to hookup this vacuum line that goes to the trans. Truck is a 94 with a 4.3 out of a 91
Nevermind, found a ground wire that was hanging back by the bell housing bolts. Grounded it and it fixed my brake light problem as well as my wipers not working. Have no clue how that one ground fixed my problems but oh well, i guess
My brake lights aren't working fuse is good and bulbs are good. I took the left taillight off and there is a red wire that goes from the harness loom and is just hanging there. There's only the red wire on the drivers taillight not one in the passenger taillight. Any ideas on what its for and...
Fuse is good, the weird thing is the brake lights used to work when the ignition was off, but when the ignition was on they wouldn't. Then i plugged in the lockup harness's plug and they were working. Now nothing when ignition on, off, or running.
Okay. Off topic but another problem I have is my brake lights aren't working. I had this problem before and a guy on here told it was because I didn't have the trans lockup harness hooked up yet. So i hooked it up and my brake lights worked, but now they don't again any ideas on this?
Oh I see, so definitely don't plug the 4l60e's plug into the 700r4 then? haha. I don't mind driving without the speedo was just wondering if it was as simple as plugging in the old trans harness
Thats weird cause I just went out and plugged the tailshaft plug in and it seemed to fit fine, I just haven't taken it on the road again to see if speedo is working. It shifts out of first fine and I have a vaccuum lockup harness to control 4th gear lockup. I'll have to go for a drive to see if...
Yup P.O. had this set up on my truck a red wire goes from trailer harness by back bumper and runs up into hood thru the firewall and hangs by the fuse box to tap into a fuse for 12v keyed power.