Drunkcanuks build...... finally!!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Drunkcanuk

I'm Awesome
Joined
Jul 22, 2021
Messages
1,878
Reaction score
5,251
Location
Alberta, Canada
I gained an 1 5/8" without all the **** in the bed, ya @Scooterwrench, it did make a difference. It measures out at 28-5/8" instead of the 27" before. Front is at 29-5/8" now as well. So within an inch of each other.
Buddy is on his way here, and within a few hours, hopefully!!!! The spacers are out from the coils and it will sit level, then drop a bit when it settles down.
Got it registered today, so I can actually drive it!!! Woohoo!![
ATTACH]368212[/ATTACH]
You must be registered for see images attach


There is actually a bed under there!!!
 

Attachments

  • PXL_20240406_173405214.MP.jpg
    PXL_20240406_173405214.MP.jpg
    251.7 KB · Views: 1

FLGS400

I'm Awesome
Joined
Nov 12, 2023
Messages
251
Reaction score
820
Location
Tampa Florida
After a couple weeks, mine settled at 29.5" in the front and 28.5" in the back. I'm just going to leave it that way. Seems to ride pretty good.
 

Drunkcanuk

I'm Awesome
Joined
Jul 22, 2021
Messages
1,878
Reaction score
5,251
Location
Alberta, Canada
Well....."we" decided that taking the spacer out at this time would not be the best. Going to let it settle down a bit. Rolling it out onto the street, had about 3/4" of clearance between the tire and fender. So I'll maybe take the front wheels off today or tomorrow and see if I can beat some clearance into them, maybe.

Got her out driving for about a half hour or so. Hit up the car wash and gave it a overdue shower. And then it started snowing!!! Lol
1st time it's seen snow since spring of 2003.
It was pulling a bit to the passenger side, so we didn't go too far or too fast. Goes for an alignment Tuesday.

Then put her back in the garage, looked at it for a bit. Then decided that now was as good a time as any to put the new mirrors on.
Then sat there for a while brainstorming ideas for it, some silly, some good and some definitely full send "R" word!! Lol
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 

Sean Buick 76

I'm Awesome
Joined
Jan 6, 2024
Messages
981
Reaction score
2,099
Location
Edmonton Alberta
Got a couple of mirrors with your name on them. I'll toss them in my truck and once stars and planets align, they will be in your hands.

Edit.... thanks!!! Was nice getting to rip around a bit.
Absolutely that would be awesome! And if you know anyone who needs some new square body mirrors you can pass them onto them. I got the wrong ones and they just don’t fit the OBS at all…
 

Attachments

  • IMG_4754.jpeg
    IMG_4754.jpeg
    236.7 KB · Views: 6
  • IMG_4755.jpeg
    IMG_4755.jpeg
    234 KB · Views: 6
Top