nortex
I'm Awesome
- Joined
- Jul 29, 2012
- Messages
- 828
- Reaction score
- 20
How do I replace the inner and outer ends?
galaxy s3
galaxy s3
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
count the number of turns it takes to get it out of the sleeve and install the new ones with the same # of turns and then bolt 'em up
That will probably work just fine. I always count the number of threads. Measure the new ones first and make sure that they are the same length as the old. I had to cut both my inner and outer rods because they were too long to fit in the sleeve. After you're done make sure to get it aligned.
I never had a problem with mine. and I did count the threads but counted turns just to make sure.