I already have 2 " drop spindles w3" drop stings. I want it a lil lower, how bad will alignment b if I swap the 3" springs for the 4" springs? I have a 7" flip in the rear, I was thinking of using shackles to level it out if I drop the front another inch. 94 gmc 1500 reg cab sb.
Western chassis 4" drop springs
- Thread starter Louis63
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Western makes a 4" spring? I didn't think anyone did & dont see it on their site... https://westernchassisinc.com/Coil-Springs-for-Chevy-C1500-Trucks/
I just cut a 1/4 off my western chassis 3" springs to bring the front down a little more.
The truck was too level at 5/7 so I cut a 1/4 coil off to get the front down for a little rake.
I just cut a 1/4 off my western chassis 3" springs to bring the front down a little more.
The truck was too level at 5/7 so I cut a 1/4 coil off to get the front down for a little rake.
Have u had any alignment issues
I have not. It was aligned once right after the drop.
This truck doesn't get many miles put on it though.
I was only able to find it on their ebay sight.
I called western chassis direct and at first the dude that answered the phone didn't think they did either. He had to check his own ebay site to make sure I wasn't giving him the wrong info. When I get home I'll post the part #
