re-use billet grill?

[fishstick]

Hi Guys, like the title says anyone ever try to remove and re install a billet insert? I put mine in about 20 years ago so I dont remember exactly the steps to put one in. I know i used pop rivets for the install.

 

[96k1500]

You could use a nut and bolt to reuse it

 

[Horns]

I don't think you would have a problem re-using the billet grill.

 

[fishstick]

ok, couldnt remember if it came with a template to drill the holes. Not sure how i'll pull that off if that's the case but might as well try before i go buy a new one.

 

[96k1500]

Use the insert as your template, thats what i did with mine

 

[JAW's]

Use the insert as your template, thats what i did with mine

Me too...

 

[Swims350]

did it on mine, got a billet grille from another truck, drilled the holes out, bought short rivets, cut my grille out, cleaned it up, installed, drilled and pop riveted it back together.

 

[Horns]

I just used a couple of small self tapping screws.

 

[///RAGMC]

Just take your time

 

[Rewind]

Just take your time

That's my problem............I tend to get in a hurry.