heavychevy98
I'm Awesome
Two questions. one, where is the knock sensor circuit on the computer plugs. Two, assuming we rule out the knock sensor, what else can pull timing?
Problem: At WOT i have 20 degrees timing. If i floor it, it goes from around 30 to 20 the moment i floor it. if you ease into it, only using a 1/4 of the throttle, it will run up to redline @ 45 degrees or so. Im stumped. Had a freind set my cam offset and do a crank relearn with his snap-on scan tool and still not right.
Problem: At WOT i have 20 degrees timing. If i floor it, it goes from around 30 to 20 the moment i floor it. if you ease into it, only using a 1/4 of the throttle, it will run up to redline @ 45 degrees or so. Im stumped. Had a freind set my cam offset and do a crank relearn with his snap-on scan tool and still not right.