that97hoe
Newbie
hey y’all i just have a quick question for everyone that uses hp tuners and wideband, i was wondering if any of you have installed the prolink device from hp tuners and could maybe help me with some guidance installing my own.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
There isn't much to it... you just run the 5v output from your wideband into the correct wire on the prolink.hey y’all i just have a quick question for everyone that uses hp tuners and wideband, i was wondering if any of you have installed the prolink device from hp tuners and could maybe help me with some guidance installing my own.
There isn't much to it... you just run the 5v output from your wideband into the correct wire on the prolink.
Thats... odd. Mine came with a wiring diagram sheet.You must be registered for see images attach
not really sure what wire is what. what wires do i connect to the actual vehicle. came with zero install instructions/diagram lol. i have watched a few videos of people installing them but all on different vehicles i couldn’t find one of a tahoe.
wait... what? Why would you need to connect the prolink to the stock canbus... you said you have a wideband and need to connect to the wideband.wow you took the same five second google trip i did then. cool. still don’t answer my question which of the tahoes wires are for the can bus. thanks. lol
sorryThats... odd. Mine came with a wiring diagram sheet.
5 seconds of google leads me to the same sheet that came in my prolink available on the HP Tuners website.
https://www.hptuners.com/pub/Pro_Link_v1.pdf
i suppose i only wanted to do it because i didn’t want to have the extra wires laying around, and i looked online for wiring diagrams and i seen that they use them for some things. and it says you can receive can messages through the scanner if i connected them connected the canbus wires. i did indeed look at a wiring diagram but at least the site i found it on i was hesitant to trust it’s reliability. so therefore i asked if anyone has installed the prolink in there vehicle. i apologize i didn’t know i just didn’t need to wire them up. i appreciate it man. and more specifically i asked for help installing pro link, not wideband, im sorry you misunderstood.wait... what? Why would you need to connect the prolink to the stock canbus... you said you have a wideband and need to connect to the wideband.
Your wideband should have a wiring diagram also. You connect the 5v output from the wideband to the 5v input on the prolink... done. No need to connect anything to the vehicle wiring, you are already linked to the vehicle canbus with the MPVI tool.
If you are trying to see the stock O2 sensor voltages... you don't need a prolink. You just go into VCM logger and look at the stock PIDs in the ECM.
and more specifically i asked for help installing pro link, not wideband, im sorry you misunderstood.
hey y’all i just have a quick question for everyone that uses hp tuners and wideband, i was wondering if any of you have installed the prolink device from hp tuners and could maybe help me with some guidance installing my own.