96k1500
Ballin on a budget
It's all making sense now...I'd preferably want to mount the lights vertically if it all possible
The lights are round haha, so you want the bolts to be to the sides instead of underneath?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It's all making sense now...I'd preferably want to mount the lights vertically if it all possible
The lights are round haha, so you want the bolts to be to the sides instead of underneath?
Hahah that's what I meant sorry for not clarifying. Bolts underneath!
Alright, bumper bolts would be easiest but could also fab up to other locations if need be
Bumper bolts it is! I guess just PM me when you have the finished product and we'll figure out that payment etc. when the time comes. I'm just hoping the lights fit in that tight space! Thanks man I greatly appreciate all the help!
If I remember right the space between the tranny cooler and the grille is just under 2 inches. So it will be pushing it, and keep in mind I still have my stock grille w/emblem. If it's not possible, I would be interested in fabbing up the brackets to where they still mount to the bumper bolts but have the lights outside in front of the grille on each side of the emblem.Those lights are only 1 1/2-2" thick should be more than enough room, how i build them may put them close to the edge since i have billet with no emblem
If I remember right the space between the tranny cooler and the grille is just under 2 inches. So it will be pushing it, and keep in mind I still have my stock grille w/emblem. If it's not possible, I would be interested in fabbing up the brackets to where they still mount to the bumper bolts but have the lights outside in front of the grille on each side of the emblem.
I tried this with some lights that 1 5/8 thick. I couldn't get them to fit with the chevy grill. I also have a tranny and an oil cooler to deal with. Kinda tough to see the coolers but this was the best pic I have.
You must be registered for see images attach