My setup is a 2wd '96 3500. I know I need to get a flex plate, but the trans shop that's rebuilding the 4L80E, had a book showing that I may be able to use the torque convertor, from the 454 setup, with my 350. The book showed 2 for the 350, low stall, and high stall, and just one for the 454, low stall.
What's the easiest way to electronically control the transmission?
Is there anything else I may run into?
Should also mention, I plan the get the column out of the donor truck as well, so I'll have the shifter, and cable. Swapping the brake pedal too.
Searching online shows a lot of people swapping the other way, but not much going to auto.
What's the easiest way to electronically control the transmission?
Is there anything else I may run into?
Should also mention, I plan the get the column out of the donor truck as well, so I'll have the shifter, and cable. Swapping the brake pedal too.
Searching online shows a lot of people swapping the other way, but not much going to auto.