new member with sas brake line question

[88chevyk1500]

hey guys im wondering what you guys do for brakes after sas swap?
the trucks a 88 k1500 and im using a dana 44 from a 73 k5 blazer
ive been told lines for 6" ifs lift will work but i also found some for 88-98 sas for 7/16 bango bolts on offroaddesign.com now im confused on which ones to order so any help is appreciated
thanks guys

 

[dirtridinz71]

I was running the stock front brakes from a 80's Corp 10 bolt with the 6" ifs front flex brake lines from my superlift. I'm quite sure the banjo bolts from my 92 worked in the older calipers too.

 

[SCOTTYINWV]

Wyatt

 

[88chevyk1500]

Wyatt

scott you found me lol idk how to make the faces

 

[88chevyk1500]

I was running the stock front brakes from a 80's Corp 10 bolt with the 6" ifs front flex brake lines from my superlift. I'm quite sure the banjo bolts from my 92 worked in the older calipers too.

so the ifs ones would work? im about 8.5" susp lift

 

[dirtridinz71]

so the ifs ones would work? im about 8.5" susp lift

Yes. You will have to move the hardlines down further on the side of the frame but the 6" ifs lift ones have enough travel to them for my 52" front springs with around the same lift as you.

 

[88chevyk1500]

i found pro comp lines front and rear on summit for $110 free shipping and i have $20 off so ima get them,

 

[88chevyk1500]

i went to check to see if my 88 lines willl work in the 73 calipers and they wont fit at all im stuck on what to do