My 454SS's, now that's alot of S's.

[Mercedes mechanic]

Tires!

And lined up right, now to clean then and paint the insides.

These are the rims off of the BBQ454.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

More to come.

 

[Mercedes mechanic]

Any pre-bidders on the black truck 454? Just for fun of course. Remember Factory with 170,*** miles. But all new, with improvements.

She's even got the correct tires.


Anyone got a good rim they want to part with? Don't have a spare yet.

 

[takkotime]

Any pre-bidders on the black truck 454? Just for fun of course. Remember Factory with 170,*** miles. But all new, with improvements.

She's even got the correct tires.


Anyone got a good rim they want to part with? Don't have a spare yet.

(They came with BFG COMP T/A 's - Mine here in Canada did anyway. My 93 still has the original rubber.)
It's a pain to find the BFG Radial T/A's here now too. I had to order ones for my 90, took a month!

 

[96twodoor]

Any pre-bidders on the black truck 454? Just for fun of course. Remember Factory with 170,*** miles. But all new, with improvements.

She's even got the correct tires.


Anyone got a good rim they want to part with? Don't have a spare yet.

if you were closer .......

 

[takkotime]

I bought my '90 with 78000 miles - all original, bone stock except for a drop, roll pan and tonneau, all original documentation and all the old parts that had been replaced. $12,000.00. Absolutely immaculate condition.
I bought my '93 with 18000 miles for twenty grand. All original + hard tonneau / fiberglass running boards still has everything original and all documentation. (White)
I bought my '93 in good running condition all parts included, with 404,000 miles (yep) all documentation but for a rebuild - for $3000.00 because it was all there / new tranny / rear end / heads + the VIN (another white '93.)
The prices are all over the board for these trucks.. but the cheapest ones are always the 90's (of course) and if you were building one to flip you would be better off putting that effort into a 91-93 in my opinion. I just looked again; in Canada on kijiji and on Ebay now there are a bunch for cheap.
http://www.ebay.ca/itm/Chevrolet-C-...Cars_Trucks&hash=item231a839380#ht_895wt_1346
Here is one all original with little mileage.
http://www.ebay.ca/itm/Chevrolet-C-...rs_Trucks&hash=item4162e381d5#ht_19668wt_1112
I dunno... how much to you hope to get for the one you're building?

I know a couple guys looking.

 

[Mercedes mechanic]

I dunno... how much to you hope to get for the one you're building?

I know a couple guys looking.

I really dont have a price for it, Im going to sell all three at the same time, I was just wondering on opinions on what I could get for it.

 

[Mercedes mechanic]

More.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

More to come.


Comments welcome.

 

[Mercedes mechanic]

Oh and I just had the column rebuilt. Cost me $75.00.

You must be registered for see images attach

More to come.

 

[1997chevydriver]

How are you gonna fix the frame?

 

[Mercedes mechanic]

How are you gonna fix the frame?

Since its only bent in front of the gear box mounting bolts, I am going to use a cutting torch and bend it straight. Then use straight bumper/core support hardware to make sure its centered as close as I can before I use the measurment guide for final tweaks.

Plus it needs about a 15* twist to the right, slight bend up and bend the core support bracket up, its not as bad as it looks in the pictures.

A frame shop would have it straight in 30 minutes, have it painted and ready to go.