Manual swap help

[95_silverado]

I have a 1995 2wd extended cab with the 5.7 vortec and 4l60e, I was wondering if I will need a new driveshaft and cross-member if I install a nv4500 in place of the 4l60e. I want to avoid having to get a new driveshaft if possible. I'm not pushing any real power so the nv3500 isn't out of the question either.

 

[MrPink]

Unless it is out of the exact same truck as yours body style wise, you will need a new driveshaft. The cross member is easy enough to move and locate new mounting holes in the frame.

 

[b454rat]

If you go with the NV4500 then prolly will need d/s as the joints are different. Not sure on the 3500. Crossmember think just needs to be moved. I don't mess with 2wd's much anymore lol...hopefully someone with good info will chime in..,,