Hunttman01
resident sh't starter
Parts needed:
Wire (I had 100 ft of 18 ga with plenty left)
Butt connectors (I had a bunch)
6 (n4005 or n4006) diodes
1 270 ohm resistor (I used a 1/2 watt)
Heat shrink
https://www.youtube.com/watch?v=wLCQWxESeOU&feature=youtube_gdata_player
There are 3 wires coming off each parking light bulb. A green, a brown, and black
Green is turn signal
Brown is park/running
Black is ground
I used the following diagram
The diodes are important as they prevent the light from backfeeding (didn't have em in the ground and both mirrors would blink with turn signal)
I paid less than $10 at radio shack for the diodes and a 5 pack of resistors
GET EXTRAS, they're fragile
If and when I fix the corner bulb stutter, I will update
NEW: demo video here https://www.youtube.com/watch?v=4-_6v6412DU&feature=youtube_gdata_player
sent from Rustbucket
Wire (I had 100 ft of 18 ga with plenty left)
Butt connectors (I had a bunch)
6 (n4005 or n4006) diodes
1 270 ohm resistor (I used a 1/2 watt)
Heat shrink
https://www.youtube.com/watch?v=wLCQWxESeOU&feature=youtube_gdata_player
There are 3 wires coming off each parking light bulb. A green, a brown, and black
Green is turn signal
Brown is park/running
Black is ground
I used the following diagram
You must be registered for see images attach
The diodes are important as they prevent the light from backfeeding (didn't have em in the ground and both mirrors would blink with turn signal)
I paid less than $10 at radio shack for the diodes and a 5 pack of resistors
GET EXTRAS, they're fragile
If and when I fix the corner bulb stutter, I will update
NEW: demo video here https://www.youtube.com/watch?v=4-_6v6412DU&feature=youtube_gdata_player
sent from Rustbucket
Last edited: