Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
$0.97 at RadioShack for a 2.2k ohm resistor. There are three wires that run to the ignition switch that are grouped together. If I recall correctly they are orange black and white. If it isnt orange then it is yellow. All you have to do is wire the resistor across the black and yellow or the orange and black and do a relearn. A relearn consists of turning the key on fire it up let it die and leave the key on. The security light will flash and stay on. After 10 minutes shut off the key and repeat. Do this 3 times and it will learn the 2.2 K resistor as the new resistance for the ignition switch. Make sure you solder the resistor into place.
You are correct! The memory was fuzzy without a schematic in front of me.You must be registered for see images attachYou must be registered for see images attachYou must be registered for see images attach