gears? best place to get

[LoudnLifted88]

im looking for some gears for my truck i can find a 8 lug sf 14 bolt with 410s but i can find any 6 lug trucks around here with 410s so where is the best place to buy gears for my stock front end and poss gears for a rear end to see if it would be cheaper to just buy a cheap 342 14 bolt and re gear it... this is for my 98 gmc thank you

 

[outalne94z71]

i always used powertrain truck parts and were pretty cheap and had good name brand gears, i see now they are liberty axle and gear as well as powertrain so i dont know if they rebrand gears now like yukon did or if they have their own tooling.

http://www.libertygearandaxle.com/index.php

 

[LoudnLifted88]

i guess im not good with front and rear ends what do i need for the front and what do i need for the rear i found the gm gears but i didnt see a 14 both listed so idk

 

[outalne94z71]

i guess im not good with front and rear ends what do i need for the front and what do i need for the rear i found the gm gears but i didnt see a 14 both listed so idk

1/2 ton front (exc diesel sub) is a 8.25 ifs, the rear is 8.5 10 bolt or the optional 6 lug 9.5 14 bolt

 

[LoudnLifted88]

1/2 ton front (exc diesel sub) is a 8.25 ifs, the rear is 8.5 10 bolt or the optional 6 lug 9.5 14 bolt

sweet thank you

 

[LoudnLifted88]

quick search on summit racing i found this

http://www.summitracing.com/parts/MGR-GM9-5-410/

http://www.summitracing.com/parts/RMG-SGM82503/

 

[outalne94z71]

quick search on summit racing i found this

http://www.summitracing.com/parts/MGR-GM9-5-410/

http://www.summitracing.com/parts/RMG-SGM82503/

motive gears are soft and seem to break easier than others,i would not recommend them.

the richmond gears are quality gears, not a bad price either as they usually are a little more than other brands and looks like come with 2 qt of lube from summit.

 

[JonZ71]

G2 gears. i won't use anything else.

 

[JollyGreen]

im looking for some gears for my truck i can find a 8 lug sf 14 bolt with 410s but i can find any 6 lug trucks around here with 410s so where is the best place to buy gears for my stock front end and poss gears for a rear end to see if it would be cheaper to just buy a cheap 342 14 bolt and re gear it... this is for my 98 gmc thank you

I'll trade you those 4.10's for my 3.73's!

 

[badazzbulldog]

jake you want me to check the yards near me and see if they have any?