Dropped my 94 a few years ago, used Belltech springs and DJM spindles in the front. Been running 17x8 torque thrust in front with 5.05" backspacing and I had to trim the A arms. Figured this was due to the backspacing.
I am now considering a set of Wheel Vintiques 42 series (C10 style rally). My thoughts were 15x7 front and 15x10 rear. I have the rear measured out and intend to go with 6.25" backspacing, the lips are rolled.
My main concern is the front because I have read post saying to watch front backspacing with a 15" wheel. Hoping a 15x7 with zero offset (4" backspacing) would work.
I realize all trucks and all set ups differ, any input is greatly appreciated.
I am now considering a set of Wheel Vintiques 42 series (C10 style rally). My thoughts were 15x7 front and 15x10 rear. I have the rear measured out and intend to go with 6.25" backspacing, the lips are rolled.
My main concern is the front because I have read post saying to watch front backspacing with a 15" wheel. Hoping a 15x7 with zero offset (4" backspacing) would work.
I realize all trucks and all set ups differ, any input is greatly appreciated.