Dev's93 Miss Setback build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Devs93

OBS 4 EVA
Joined
Aug 16, 2010
Messages
13,122
Reaction score
166
Location
Shelbyville IN
If anyone comes across and gauge needles from a buick rendizuos lmk they are sweet. I was going to try n get some today but didnt have all my tools with me.
 

Devs93

OBS 4 EVA
Joined
Aug 16, 2010
Messages
13,122
Reaction score
166
Location
Shelbyville IN
Leaf spring hangers suck specially the drivers side I gotta pick up a couple bolts tommorow and the flip kit will be complete I m gonna cut in the notches at my dads shop later in the week
 

Devs93

OBS 4 EVA
Joined
Aug 16, 2010
Messages
13,122
Reaction score
166
Location
Shelbyville IN
Thanks k1500
I really need to get my notches in but the back is done. I thought I was all done and wrapped today went to put the shaft back in and could not get it. I ****** up and put the bracket for the flip on backwards so I had to most of it back apart and try again. Upside no vibrations Bad/good I think I ended up with about 8 inches of drop. I gotta lil cali till I do the front but not to bad will get better pics tomorow.


You must be registered for see images attach

You must be registered for see images attach
 

Devs93

OBS 4 EVA
Joined
Aug 16, 2010
Messages
13,122
Reaction score
166
Location
Shelbyville IN
got the notches on today. I think Im going to order like an 8 in step notch though and put it on . Then go ahead ahead and tub n channel my bed before I paint that way its all done and ready for air ride down the rd. I was going to wait and the tub channel later since its going to be bedlined anyways but hell whats a few more weeks. Also thinking on down the rd as far as air ride goes I'm thinking of gettin the kp bolt on 4 link setup with a watts. As far as the front goes Im not sure if its cheaper to peice it together or get the kp lay a arm setup.2 vair 480s. what size tank and line should I get also need advice on a good manifold.
 

Devs93

OBS 4 EVA
Joined
Aug 16, 2010
Messages
13,122
Reaction score
166
Location
Shelbyville IN
oh yea the sweet smell of primer!Hopefully the bed will be matching the primer color before next weekend.


You must be registered for see images attach

You must be registered for see images attach
 
Last edited:
Top