started doing this today and the bulb hits the lens. the new lens i got are vision brand after market from ebay, they look and fit real nice but are shallower between the lens and the back piece, the bottoms are fine but the tops dont have room for the bulb. i cut the entire thickness of the mounting ring out of the old lower and just drilled a hole in the new upper so that adds a quarter inch or so by time its epoxyed on but i need another 1/8 inch or so. so do they make a shorter bulb in that style or am i screwed and need to start over with differant lens or make a spacer for the bulb socket?