cluster?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

5.7X28

Newbie
Joined
Oct 27, 2013
Messages
25
Reaction score
2
I just got an esky cluster for my 96 Sierra. I installed it and everything seems to be working fine with the exception of the fuel gauge. The needle is moving very fast between 3/4 and the F. The needle on my old cluster did this when going up and down hills, but not nearly as fast.

I have googled this issue and most people have been quick to point out a fuel sensor. However, I doubt this is the case with mine, since my other cluster worked fine.
Any suggestions?
 

VorTecxas

American Nightmare
Joined
Sep 19, 2012
Messages
939
Reaction score
46
Location
McKinney, TX
I'm chasing something similar, swapped a 110 cluster into my Tahoe and the fuel gauge seems way too sensitive, jumps a lot more than it should under acceleration and braking. If I find something I'll let you know
 

5.7X28

Newbie
Joined
Oct 27, 2013
Messages
25
Reaction score
2
Kind of feel like an idiot. I just saw the sticky on this.
 

5.7X28

Newbie
Joined
Oct 27, 2013
Messages
25
Reaction score
2
5.7 is the missing link.
You must be registered for see images attach


Left to right is a 9mm, 5.56 and 300BLK.
5.56 and 300 uppers are interchangeable. 9mm will have a dedicated sbr lower.
You must be registered for see images attach
 
Top