Any way to pop this out?

[ShadowRejects]

me and a good friend got into a small fender bender today. (story on my build thread)

I was wondering... I have access to the dent from the inside of the cab when i remove the back pocket. But not enough leverage to pop it out with a mallet. Any ingenious ideas that would pop this SOB out? I dont mind having dents on my truck, but i would like for the trim to be atleast semi-straight. Lol

You must be registered for see images attach

 

[98chevyz71]

I believe u can get to it by taking that interior door panel off and u could pop most of it off by hand then use a sand bag and mallet

 

[Half Assed]

that ain't popping out

 

[ShadowRejects]

that ain't popping out

I know that for a fact lol I just want to pop it out as best as possible and fill the rest with bondo and touch it up with colormatch paint.

 

[sewlow]

that ain't popping out

True! But it will probably buff out quite nicely!

 

[whiplash473]

You could get behind it with a pry bar and get it out a little..it's still gonna look bad though


Sent from bored/stroked iPhone

 

[JollyGreen]

True! But it will probably buff out quite nicely!

LMFAO!

Sent from my Taliban Killing Droid

 

[KReePiN]

You must be registered for see images attach

 

[ShadowRejects]

True! But it will probably buff out quite nicely!

I tried buffing it out and it worked. the dent looks like it was never there now.

 

[DR CHOP]

if your going to paint it anyways you need a stud gun. the weld on stud type.