BoxerPitMix
Chris
So the genius that owned my truck before me had a plastic bed liner that came over the rails and a tool box in the bed. The bed liner ruined the paint on top of the bed rails, and 4 nasty holes were drilled into them for the tool box as well.
Friday I am going to drop my truck off for a color-matched spray in liner and am going to have it ran over the bed rails to cover everything up.
But here is where I need help! I would prefer to fill the 4 holes up somehow before I get my liner installed. I do have a small welder like the one pictured below - should I put a small piece of metal underneath the bottom and try to partially fill the hole with weld, then bondo the top? It will be covered with spray-in liner, but I just don't want to make it worse. It looks like a rust has started to develop around the holes too... Should I grind it down to bare metal and bondo that as well?
Here is the little Mickey-Mouse welder I have
Friday I am going to drop my truck off for a color-matched spray in liner and am going to have it ran over the bed rails to cover everything up.
But here is where I need help! I would prefer to fill the 4 holes up somehow before I get my liner installed. I do have a small welder like the one pictured below - should I put a small piece of metal underneath the bottom and try to partially fill the hole with weld, then bondo the top? It will be covered with spray-in liner, but I just don't want to make it worse. It looks like a rust has started to develop around the holes too... Should I grind it down to bare metal and bondo that as well?
You must be registered for see images attach
Here is the little Mickey-Mouse welder I have
You must be registered for see images attach