Turbogus
Newbie
- Joined
- Jun 24, 2018
- Messages
- 2
- Reaction score
- 2
Hello to everyone, this is my first post to this forum, being referred from another with regard to the difficulty I'm having.
So far I've had replaced both wheel hubs (w/sensor), left axle, EBCM module from a '96 1500 PU from the wrecking yard (same result) and ran the grounds to a bimetal strip I have on the fender and ran to the negative battery terminal.
I've had codes run over the last year and it's narrrowed down to a code 67 (Open Motor Circuit or Shorted EBCM output).
I've been scouring the web trying to find a rebuilder or an NOS replacement and so far only one rebuilder may be able to rebuild this 310, Module Masters, but their tech is tied up for an indeterminable time.
I already am aware that Kelsey Hayes 325 rebuilders abound, but the 310 is different.
Does anyone know of other rebuilders of the KH 310?
Thanks and a lift of the lynch lid for any responses.
Gus
So far I've had replaced both wheel hubs (w/sensor), left axle, EBCM module from a '96 1500 PU from the wrecking yard (same result) and ran the grounds to a bimetal strip I have on the fender and ran to the negative battery terminal.
I've had codes run over the last year and it's narrrowed down to a code 67 (Open Motor Circuit or Shorted EBCM output).
I've been scouring the web trying to find a rebuilder or an NOS replacement and so far only one rebuilder may be able to rebuild this 310, Module Masters, but their tech is tied up for an indeterminable time.
I already am aware that Kelsey Hayes 325 rebuilders abound, but the 310 is different.
Does anyone know of other rebuilders of the KH 310?
Thanks and a lift of the lynch lid for any responses.
Gus