a/c blend door

[pipelinewelder20]

where is it located and how is the best way to go about changing it

 

[Devs93]

Ill let ya know soon mine is driving me crazy so annoying

 

[nine4gmc]

check the thread in my sig. you have to remove the dash and heater core box if its the one on the backside.

 

[Bertiespeed]

i just unpluged mine from under the dash (passenger side) i ripped out my ac

 

[illinoisboy]

If its the back passenger side, there is a thread on it that i made some where, ill try and find it for you!


Here it is! http://www.gmt400.com/forum/showthread.php?1999-knocking-noise-from-dash

 

[93 K1500]

What one is it??? IF its the pass side lower you can change it with out removing the dash it is held on with 2 bolts the one on the top you will not be able to see (PIA) pull it out towards the drivers side. once it is away from the blund door you can pull it down enough to un clip the connector and change it out. Reverse for install. Once you have the new one connected you have to turn the truck on BEFORE you reinstall- this will set the new unit to the proper rotation. then put it all back. IT is a very tight area but it can be done.

 

[pipelinewelder20]

sorry guys it's a 97 ex cab

 

[pipelinewelder20]

ok guys changed that piece now i see there is another at the end of the black box on the driver side

 

[monstar_est87]

Is it the blend, door itself u need to change..? Or is it the accuators that control them..?

 

[pipelinewelder20]

ACTUATOR