TerryH
Lets go racin' boyz!!
All of mine were plug and play.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Maybe I’ll be able to contact an LED supplier, and see if they know. Thank you!!All of mine were plug and play.
Awesome looking truck there.
Ive got a question for you. Did you have a driveline vibration issue after the drop.
I installed a DJM 5/7 and have been fighting a vibration
Terry, your truck is an inspiration!! This thread is saved to my computer!You must be registered for see images attach
No vibration. The Belltech kit had a driveline spacer to go under the carrier bearing to correct the driveline angle.
Thanks.
And how much did the spacer raise bearing
2" spacer under the bearing. There are also 4° shims for the rear saddles as well. Link is the instructions. Parts list on page 2 of the pdf.
https://www.belltech.com/extras/docs/BBGC/6926.pdf
Thanks . You've been a big help for me.
The DJM is adjustable pinion angle I believe I got set good but I'm gonna make a 2in spacer for carrier bearing since the djm only came with 2 plates that made up a 3/8" spacer and the driveshaft looks "V" at first u joint behind carrier. And ive tried various spacing under carrier and trans but never has been quite right.
Thanks again and sorry for the thread jack