95 gmc sway bar link

[loom383]

I was just doing some work on my truck and noticed my sway bar link on my drivers side was broken... So I went and picked up a pair of sway bar links(easy enough or so i though) and decide i would throw them right on. Well I for the life of me can not line these suckers up. Any tips or advice for installing these guys? Thanks for any help!

 

[twomanymontes]

I have had good luck installing them with the truck flat on the ground, push the bolt up through the lower control arm then through the sway bar. I use a 3 foot pry bar to flex the sway bar downward to get the nut on. Once the nut is on a few threads, jack the lower control arm to take some load off the link. Tightning the link I have used a swivel socket at the bottom and a wrench on top.

Hope this helps

 

[eg30.06]

are your torsion bars cranked???? if so thats probably why its fighting you