Manimal
Banned
- Joined
- Sep 8, 2014
- Messages
- 165
- Reaction score
- 73
ok, so I have decided I am going to swap in my NV4500 from my 93 k3500 into my 94 Yukon k1500. I am going to use the tranfer case and all from the 3500. I have questions about the wiring and ECM. I have the EMC from the K3500. Do I have to change the entire harness? What about the A/C? the k3500 did not have it, the Yukon does. It appears to run through the firewall in the same spot under the overflow. Does that pass-through come apart to get the A/C wires out? Or can I just eliminate the transmission wiring from my existing harness and use the 3500 ECM or get an ECM for a 94 with a manual trans?
Thank You
Thank You