twomanymontes
car show addict
Thats the fitting for the heater hose tube right?
Take a hack saw blade and make 3 cuts, at 12 o'clock, 5 o'clock and 7 o'clock. Stop before you contact the threads. Then take a screwdriver and tap a section inward, it will fall in. Pick it out and then knock the other 2 section loose. Install the new fitting with teflon tape on the threads.
hope this helps.
Take a hack saw blade and make 3 cuts, at 12 o'clock, 5 o'clock and 7 o'clock. Stop before you contact the threads. Then take a screwdriver and tap a section inward, it will fall in. Pick it out and then knock the other 2 section loose. Install the new fitting with teflon tape on the threads.
hope this helps.