NealK1500
Newbie
So I found these wires in my engine bay… Ive been slowly fixing this up and I assume they go to the 4x4 actuator. The actuator wires are cut I am gonna replace the actuator. There is a white 4 pong connector on the axle, which actually only has 3 wires in it to connect to. There is 5 wires coming out of the main harness. What connectors do I need to get for this repair and how does this go lol. I’ve tried looking for a diagram showing the connectors but I can’t find one. It is a 4x4 in the floor.