manual transmission

  1. A

    Does the nv3500 manual transmission have cooler lines?

    Hi I have a 1995 chevy k1500 short-bed stepside with the 305. It has a 5 speed which I believe is the nv3500. The previous owner had replaced the radiator with an aftermarket aluminum one and there are ports on the passenger side that I’ve seen automatic transmissions hooked up to, but mine...
  2. A

    3/4” or bigger clutch master cylinder?

    Hey guys, got a lq9 and a tko600 in my 95. Went with the ram 78131 throw out bearing and used my stock master cylinder. Turns out I need a 3/4” or bigger bore in the master cylinder and the stock one is .700”. Clutch pedal feels perfect it just doesn’t go push the bearing in far enough to...
  3. A

    Making an external slave work with a Ls?

    Over the past few months I’ve been swapping an lq9 into my 95. Finally got to where I thought I was really close just to bolt up the trans and have the slave cylinder interfere with the oil pan. So now I’m at a crossroads, either swap in a 96+ nv3500, convert mine to internal, or go to a t56...
  4. DTG_

    1991 K2500 5.7V8: MT35845A vs MT34585

    Driving down the highway and tranny gave out. Was a rebuild from a shop 6 yrs ago so mighta been long time coming, but need to replace. Manual says these 2 are possible 5-speed manual options. Looking the 2 of them up I can see one the 35845A includes the bellhousing and the 34585 doesn't. Are...
  5. L

    V6 to v8 swap

    I have a 89 c1500, it’s 2wd single cab with a 5 speed manual. I was just wonder what all I need to put a 383 in it it will be carbureted, and if the trans in it currently will bolt right up. Thank you in advance!
  6. I

    6.5 with 4L80E to Cummins w/ a manual ?

    Good evening guys, I picked up a 1993 Chevrolet C3500 crew cab dually out of Texas. Rust free, Traveltime trainers conversion. truck is used to haul my 44ft gooseneck race trailer. As you can imagine, she's a dog. I am looking to swap to an 8.1 vortec or a Cummins with a manual trans. I was...
Top