Search results

  1. Tdean91491

    NP 241C

    Running into a little problem. Recently when when I shift from drive/reverse into park (on any kind of incline, causing the truck to roll a tad bit forward or backwards) there's a god awful "popping" noise coming from what I believe to be the transfer case and the truck proceeds to hop in what...
  2. Tdean91491

    GlowShift Gauges

    Anyone have any experience with this brand of gauges ? Thinking of using the dual temp for trans fluid & the motor oil temp.
  3. Tdean91491

    Fuel pressure & misfire question

    Alright I’ve looked every where and can’t find a direct answer. I’ve got #3 & #5 misfiring at idle after I drive for 15 or so minutes. I’ve got the DashCmd app with the live data and all. It’s not throwing a misfire code though. New cap, button, plugs and wires. Fuel pressure is 60-65 on start...
  4. Tdean91491

    GM 15244099 electric fans

    Anyone used this part number before? Does anyone know if they are two speed fans or ?
  5. Tdean91491

    Brake Proportioning Valve Questions

    What aproportioning valve do I need to bypass the abs on my 96? Maybe a good diagram and parts list also? I’m getting a little confused with everything I’ve read.
  6. Tdean91491

    Time for an audio upgrade

    I’ve been looking at upgrading my front door speakers and the rear speakers. I replaced the radio that was in the truck a few years ago with a Kenwood KDC BT340U radio. Looking to definitely replace the speakers and possibly the radio. Looking to get some ideas.
  7. Tdean91491

    eletrical problems

    Okay guys so i followed east302's dash removal guide to replace my evaporator core. Well ive got everything back together everything but the rpm, mph and the gear light work just fine. Ive got a kendwood radio in it and its saying bad wiring check wiring then power on. When goijg back with the...
  8. Tdean91491

    Air cleaner adapter gasket

    Anyone having any luck finding an OEM or a suitable aftermarket replacement for this gasket/seal? The adapter is number 16 in the parts diagram.
  9. Tdean91491

    Ac system advice anyone?

    Alright guys, gotta ac system question. A few years back I wrecked my truck well in the little of fixing everything I broke the ac going from the condenser to the evaporator core at the fire wall. I replaced the condenser because I crushed the old one in the wreck. Got tired of fooling with it...
  10. Tdean91491

    Helper spring or new leafs for the rear?

    I've got a 96 k1500 and I've noticed the leaf springs look & when I hook to something feels like they are worn out. Any kind of load in the bed or on a trailer it sways really bad. Anyone had any luck with any helper springs?
  11. Tdean91491

    What gear Ratio is best?

    Alright guy’s I’ve been debating on pulling the rear axle and the front differential off of one of my parts trucks, replacing all the bearings and seals & regearing them. I’m running 35’s and plan to keep running them. What ratio would benefit the most?
  12. Tdean91491

    Extended upper control arms

    Anyone running the extended upper control arms just having the keys turned up some? Just trying to see if it’ll be worth the 350 some odd bucks to avoid having to replace ball joints every 6 months.
  13. Tdean91491

    Front diff problem

    Alright guy’s Ive been having a bad vibration once I hit a certain speed. I’ve tried everything and eliminated almost everything. Then I noticed something strange my passenger side tire wouldn’t free spin unless I used an excessive amount of force. The drive side spins with ease. So I’ve done...
  14. Tdean91491

    Bad shake at certain speeds

    Alright guy’s between 40-60 mph I’ve got a really bad shake in my front end. I just did a rotate and balance, haven’t long replaced all the tire rod ends and upper ball joints, idler & pitman arm. Had an alignment don’t after I replaced everything. Steering is pretty tight nothing seems to be...
  15. Tdean91491

    Trailer plugs

    Where are you guys mounting the plugs similar to this on?
  16. Tdean91491

    Edit

    Edit
  17. Tdean91491

    LED Pods

    Does anyone have the flush mount pods mounted in the front and rear bumper?
  18. Tdean91491

    Cluster problems

    Alright guys I’m having an issue with my temp gauge not working. I’ve replaced the sender and the sensor. Tried 3 different clusters. Anyone have any ideas?
  19. Tdean91491

    Brake Proportioning Valve Questions

    What aproportioning valve do I need to bypass the abs on my 96? I’m getting a little confused with everything I’ve read.
  20. Tdean91491

    6inch Rough Country

    Looking to put a 6inch under my 96. The Rough Country 6inch is it decent for the price? I’m not looking to build a trail truck or anything fancy, just looking for a smoother ride while running 35’s. I’ve heard both ways from different people, just wanted to get some opinions from you guys.
  21. Tdean91491

    Efan temperature switch

    Yes I’ve read the post about doing the MARKVIII set up, I can’t seem to get my hands on all the parts he has listed in his post. Have any of you guys recently added efans with a temperature switch still a have a parts list ?
  22. Tdean91491

    Tweeters

    Where are you guys mounting after market tweets in your door panels? I need a few ideas!
  23. Tdean91491

    Reverse led pods

    Anyone have pods mounted in the rear bumper for back up lights? Just wanting to get a few diffrent ideas of where to mount them.
  24. Tdean91491

    CMP offset question

    Alright guys I’ve noticed something my crankshaft position sensor has two shims on it. I know according on if the sensor is hitting you have to use the correct number of shims to make it so it doesn’t. Could the shims cause my CMP offset to be zeroed out but my advance timing for cylinder #1 to...
  25. Tdean91491

    O2 sensor trouble

    All four sensors have just been replaced, no leaks and these are the codes I’m getting. Any of you guy have this problem before and find a solution to it ?
Top