yevgenievich
I'm Awesome
I now have a spare 2wd fully splined output shaft to sell. Ordered a new one originally to make sure and have one to cut down, but this transmission came with one already.
Last edited:
4l80e build
- Thread starter yevgenievich
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
yevgenievich
I'm Awesome
Inspected everything and sorted. Waiting on couple of more orders to get here. I have some stock parts to get rid of. Decided to give up on trying to resurface the pump. I have the set up to get it, but as crucial the component is, ordered a reman from transtar. It was not even bad by feel, but going on the safe side as too many costly hard parts are in use. I will be reusing my currently installed valve body(sonnax rebuild with overrun modification) instead of this one, but still will go over it as the plan to change valve bodies between transmissions and sell currently in use transmission complete.
Following are the pieces for sale:
good forward hub
direct drum
pump assembly
front shaft
main shaft
2wd output shaft and tail housing
Following are the pieces for sale:
good forward hub
direct drum
pump assembly
front shaft
main shaft
2wd output shaft and tail housing
yevgenievich
I'm Awesome
I have somewhat of collection on 4l80e information. Went ahead and stuck it on google drive as one zip file if anybody else gets bored to go through it.
xc_hide_links_from_guests_guests_error_hide_media
yevgenievich
I'm Awesome
Working out case issues.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Last edited:
stutaeng
I'm Awesome
OP, any updates on the build? I've got a few of these units laying around. I was going to use this thread as motivation to tear into them...
(not a "build" though, just a "rebuild" for me, joke)
(not a "build" though, just a "rebuild" for me, joke
)
Last edited:
yevgenievich
I'm Awesome
Working on that first drum. And spring removal make shift rig.
You must be registered for see images attach
You must be registered for see images attach
yevgenievich
I'm Awesome
Also had the case cleaned at a local shop, and started thinking on how to set up the assembly of the case. Order from CK finally showing to be arriving tomorrow after about of month of delay.
yevgenievich
I'm Awesome
Missing few parts from the order.
You must be registered for see images attach
Brothajack93
I'm Awesome
I was thinking about doing the same thing myself. Nothing is better than a physical copy of references to in depth and visual examples of what is involved in these overhauls. Most people who’ve tried it have had success. Not everyone ends up on precision transmissions autopsy table lol. Been studying a lot of his tear downs for diagnosing problems
