Recent content by Solid94

  1. Solid94

    Hellwig rear sway bar

    There are numerous versions of "hell wig" style helper springs out there. My question is are you goin for load stability or handling? My work truck (c3500) has a set of helper springs do to the amount of tools in the utility boxes and it was a straight forward few hour install
  2. Solid94

    Solid94's Build Thread

    So I finally got around to pulling the rear monster leafs out of the truck and went with a shackle flip. Turns out my truck is too heavy for the stock 1/2 ton springs so I picked up a set of stock 3/4 ton springs. So hopefully get those swapped out and then the rear should be dialed in!
  3. Solid94

    Solid94's Build Thread

    Sweet!! Make sure to post it up when it's all installed!
  4. Solid94

    Solid94's Build Thread

    These are the brackets I used. I know they are pricey but if you don't want to do the fabbing it's a good alternative http://dezertlighting.com/products/88-98-chevy-gmc-obs-50-radius-mounts?variant=6442267393
  5. Solid94

    30" LED Bar Install + Pics

    Those custom brackets look good. I went with some brackets I found online. A little thin and pricey but got the look that I was going for. Still have to do that wind noise mod
  6. Solid94

    Solid94's Build Thread

    On long trips my 14 bolt steel diff cover retains the heat so the gear oil boils out the vent tube. So I pulled the trigger on some aluminum diff covers from WFO Concepts! Had to match so I got one for the 60 too.
  7. Solid94

    Solid94's Build Thread

    Okay not much has changed this year on my truck. Just installed a headache rack. Goin in the direction of work/wheeler direction now. Finding I need 4wd and I can't justify $50k+ for a 4wd utility bed truck lol
  8. Solid94

    k2500 SAS

    I have an old ORU kit. It's served me well but I'm leaning towards redoing the set up with 52" long springs or even coil overs. The real question is what are you after? If money isn't an object a 3 link or radius arm set up would be smooth as butter. Just my .02 lol
  9. Solid94

    Another tire carrier build

    Great design on the tire carrier and beautiful Tahoe man!!!
  10. Solid94

    Solid94's Build Thread

    I got both of mine on Amazon. The bracket is a little pricey but worth it if you don't have the tools to fab some of your own
  11. Solid94

    Solid94's Build Thread

    Dezert Lighting is the company that makes these brackets. It's the same design as Bro Industries. They only make them to fit a 50" or 52" curved light. If you go with them let me know because they have no directions and the customer service from Dezert Lighting isn't the greatest. If you place...
  12. Solid94

    Solid94's Build Thread

    Okay so I finally got one light bar installed and all wired up today after work
  13. Solid94

    Solid94's Build Thread

    So I pulled the trigger on two light bars and they should be in by Friday. One for the bumper and one for the windshield!
  14. Solid94

    Water Temp Switch Issue

    Well the POS tstat I bought at auto zone was stuck wide open.....new tstat from Napa(made in the USA) and everything is working as it should. What a PITA lol
  15. Solid94

    Water Temp Switch Issue

    No mine is literally between the 100 and the first tick mark. I'm stumped because it's not making any sense. Tomorrow I'm gonna check the thermostat just to be safe. I installed a new one 2 months ago when I did a coolant flush and replaced the hoses
See more

Latest posts

Members online

... and 7 more.
Total: 1,828 (members: 57, guests: 1,771)

Forum statistics

Threads
64,373
Messages
1,392,453
Members
51,515
Latest member
Grimm6675

Share this page

Top