Recent content by liftedexpectations

  1. L

    push button 4x4 to 4 on the floor ? ?

    thanks guys all the info yall have is extremely useful and the rite up answered pretty much all the questions i had so far . thanks for that 88gmc ! and thanks volunteer for the cable link ! ill be gathering up all the parts from our local bone yard this week more than likely and make a build...
  2. L

    push button 4x4 to 4 on the floor ? ?

    ok so i searched around the net to find out what all you need to do this but nobody gives a definite answer .i hate the push button bs and im tired of stuff failing on it . so what all will i need to do this swap ? and is there anyone that has done this swap on here ? if so what kind of problems...
  3. L

    blowing fuses ?

    ok so i found out that my tcase fuse was missing out of the fuse box i put a new one in and my 2hi 4lo and 4 hi lights flashed and i tried to put it into 4hi and the fuse blew ? tried this about 3 times with 2 hi 4lo and 4hi again and it blew it every time ? anybody have any ideas ? is it...
  4. L

    poping in my front end ? ? any ideas ? ?

    but it only does it in the proses of turning . i can turn the wheel to the rite or left and do circles and it wont pop its only when my steering components are moving ? and it seems to do it sometimes when im stopping
  5. L

    z71 acting very strange ? ?

    thats a good point . thats probably what i will do . a buddy of mine owns a shop so ill call him tomorrow and see what he can figure out for me . thanks guys
  6. L

    z71 acting very strange ? ?

    so do i need a new torque converter ? i know the trans was replaced not to long ago . so where should i start ?
  7. L

    07 sierra front brush guard on 96 z ?

    does anyone know if a winch bumper off of an 07 sierra would fit on my 96 sierra ? it seems to bolt up the same but im not 100% sure . its a winch bumper with front light and grill guard that i had on my 07 and i just want the luxury of having a winch on my truck again lol
  8. L

    z71 acting very strange ? ?

    so i had to drive over to new orleans for work and b4 i did i have only drivin the truck around town and on a rare occasion on the interstate for very short distances . the truck ran fine it seemed but on my way back to mobile i noticed the rpm gauge would surge between 2300rpm to 2600rpm on a...
  9. L

    poping in my front end ? ? any ideas ? ?

    ok so i lowered my torsion bars b4 i drove over to new orleans for work it rode a hell of alot better (of course) and the steering was also better and it drove fine the whole time i was over there with no problems at all . now i have a popping noise in my front in when i turn occasionally (fisrt...
  10. L

    Fox shocks 6" pro comp lift HELP

    yea i like those alot . there super easy to install and they hold the reservoir really well . they had a blue anodized one but i cant seem to find it and those looked awesome if i find some ill put the link on here for you . yea just keep an eye on the tear and make sure it doesnt spread . as...
  11. L

    3500 front end on a z71 ?

    yea thats a very good point thanks for that input ! and as far as blowing cvs i have a built 355 and a lead foot lol not to mention my torsion bars are cranked to the max and i think im blowing them out because of a bad cv angle for the most part . yall think after i got a lift i would go...
  12. L

    Fox shocks 6" pro comp lift HELP

    i dont have any experience with the lift but i do with fox shocks and as far as your revisor clamps pollyperformance has some realy nice clamps made by fox that look realy good imho heres a link to one of them . they have some more that look good just go to shocks on the home page then to Shock...
  13. L

    3500 front end on a z71 ?

    well its not coming up for me to correct it but i ment skyjacker not superlift
  14. L

    3500 front end on a z71 ?

    ok so i found a 6" superlift with all the parts for $70 at a local junk yard and now i dont know what direction to go ? ? its kinda hard to pass up the lift for that cheap and i can still buy parts for the solid axle at that price and still have a lifted truck to cruse around in will im building...
  15. L

    4L60E Rebuild. Help with parts!

    i rebuilt a 4l60e in a camaro and i went with a whole rebuild kit from monster transmission and it has all the upgraded parts for the trans that you could find all in one package . i never had a problem with it but i did rebuild it myself and i have herd bad things about there full rebuilt trans...
See more

Latest posts

Members online

Total: 796 (members: 40, guests: 756)

Forum statistics

Threads
64,743
Messages
1,399,769
Members
52,348
Latest member
chuck12

Share this page

Top