Recent content by Cody302

  1. C

    Helicoil starter bolt hole

    That was my other idea. I had heard about Alumaloy/Castaloy to fill the hole then drill and re-tap it but I have no experience with it
  2. C

    Helicoil starter bolt hole

    Nobody?
  3. C

    Helicoil starter bolt hole

    bump.
  4. C

    Helicoil starter bolt hole

    The starter bolt mounting hole seems to be at an angle My inserts always end up coming out like this when I put the bolt in I am using a 3/8" 16 X 1.50 insert for a 3/8" 16 x 4-5/8 bolt Maybe i just didnt drill out the hole far enough?
  5. C

    Helicoil starter bolt hole

    bump.
  6. C

    Helicoil starter bolt hole

    Hey guys got an 88 1500 with a 4.3 that needs a starter Problem is, the threads in the block where the bolt goes, is stripped. I've tried using a thread repair system with threaded inserts but it looks like the hole is sideways? Ive looked on the V8 and it goes straight up but mine is on an...
  7. C

    Top post battery conversion

    I want to convert the battery in my 88 K1500 to a top post battery (for obvious reasons lol.) Besides replacing the cables What do i look for in a battery? Do i just match up the cold cranking amps and physical battery size?
  8. C

    Can anyone identify this wire?

    Factory 5speed. No cluster at all, that's what I was suspecting. Didn't see any open ports though?
  9. C

    Can anyone identify this wire?

    I have this wire coming off my transmission but its not connected and im not sure where it goes to? NV3500 to NP241 t-case
  10. C

    NV3500/NP208 question

    I know the transfer case being in neutral would cause the truck not to move but, would it allow the truck to stay running in gear without the clutch pushed in? Trying to figure something out from a previous thread
  11. C

    NV3500 problems

    Yep, both shafts spin with no problem in each gear
  12. C

    NV3500 problems

    Yep, spins no problem
  13. C

    NV3500 problems

    It feels like its going into gear. When i pulled the transmission out, i connected the shifter and went through all the gears. Everything was fine
  14. C

    NV3500 problems

    Looks like its the transfer case. Possibly a broken chain and stuck in neutral. That wouldn't explain why the truck stays running without the clutch in though?
  15. C

    NV3500 problems

    What about symptoms of a blown transfer case? I have the 241C behind the trans which, i believe has the vehicle has to be moving in order to shift. Probably should have elaborated more on "Messing around", i meant he kept shifting back and forth rapidly between the drive modes (4hi, 4lo...
See more

Latest posts

Staff online

Members online

... and 16 more.
Total: 1,845 (members: 66, guests: 1,779)

Forum statistics

Threads
64,455
Messages
1,394,372
Members
51,704
Latest member
Hectormtz

Share this page

Top