Recent content by cobalt

  1. C

    My 1996 chevy RCSB 5.3/t56 swap

    I'm about to do that exact swap.....different color and end design but 5.3 and t56 think I could bug you on a parts list of the conversion parts and simple stuff? And what rear gear your running?
  2. C

    My 88 rcsb

    shoot paint the torpedo olive green put a shark face and one end and fins on the other...then you could use it as a show piece .... looks good my friend
  3. C

    C2500 upper front A-arm on 93 C1500

    im going to run the c2500 arms on my truck but swaping ball joints to k1500 so theres no modifying the knuckle it may be cheaper to get a set from the salvage yard and do the ball joint swap
  4. C

    ? about the rear brake hose / vent tube bracket.

    what kind of notch do you have the weld in or bolt it? and what drop? i drilled the two small holes on the notch for my bracket and threaded the hole for the bolt if its bolt on id think it would have a spot to drill threw
  5. C

    Tires ...

    there is a couple shops i used to work at that keep the transforce in stock. i wish they came in low profile tires i wouldnt have gotten rid of my 3/4 ton
  6. C

    Tires ...

    ive herd a few people say lexani's tires are way to soft for heavy trucks it chews them up. personaly i stick with nittos on all my stuff unless i get a deal on the firestone destination s/t tires.
  7. C

    Veeman's 97 build

    like the wire wheels i thought about getting the 22' ones dayton was selling but i picked one up and lordy my truck would need 400 horses to turn them..yours look just right though. its going to look real good with the satin.
  8. C

    about to start the stock floor body drop

    sweet saves me some headach...you wouldnt have some tips or tricks before i start in on it do you?
  9. C

    about to start the stock floor body drop

    so ive done my reseach and got all my stuff to do the stock floor body drop but i keep seeing every now and then that some are z'ing there frame or dropping the core support mounts down 1/4 to 1/2 farther down then the cab mounts..is the crossmember lower than the rails of the frame? i want this...
  10. C

    98 Chevy Suburban C2500 drop kit questions

    its quite all right i can say alot of the pictures online stores use are a genaric show of parts. its thown me a couple times as well but glad to know you called them and did some research too.
  11. C

    98 Chevy Suburban C2500 drop kit questions

    it puts the axle on top of the springs beltech should supply a notch with the flip to allow suspension travel. they think it out farely well. if thats the company your geting the drop from as well. the springs them selfs dont move other than to get out of the way to get the springs on top.
  12. C

    Sfbd and int carpet Q

    had plans of ditching mine but when i finaly get to do the trans tunnel on mine i can throw the old one in and see if it fits..i have a regular cab thought too so it may be diffrent.
  13. C

    98 Chevy Suburban C2500 drop kit questions

    you can do the 4or5/7 drop to get the lowest you want but if you get to low being as long as you are if there is to much of a sudden grade change you can high center easy. but with the helper bags you can haul without and issue. it will even help having everyone and all the gear alone the bags...
  14. C

    Wiring harness relocating question

    most either put it over under the booster or raise it up on the firewall.
  15. C

    Question on Pie Cutting Uppers??

    i want to say they are the same just diffrent mounting spot
See more

Latest posts

Staff online

Members online

... and 8 more.
Total: 1,333 (members: 58, guests: 1,275)

Forum statistics

Threads
64,739
Messages
1,399,694
Members
52,332
Latest member
9FIVE_TAHOE

Share this page

Top