Recent content by CarlsonPainting

  1. C

    No tail lights, tag lights, reverse lights, dash lights, or parking lights Working.

    I wasnt aware of a underhood fuse block on this 93. So probably should start with trailer harness?
  2. C

    No tail lights, tag lights, reverse lights, dash lights, or parking lights Working.

    So the brake lights and turn signals work in the front and back. But when you turn on headlights the whole back stays dark, and no dash backlighting comes on. When you switch to parking lights nothing happens. I have checked fuses and they are all good, I went ahead and replaced them just for...
  3. C

    Stalling, Rough running, Rough shifts threw 22 code, replaced TPS no fix. Ideas?

    Im starting to wonder if its injectors or something. I might end up just sending it to MR. Car Wizard shop in Newton, KS. Im kinda at a loss. Im going to do some testing on the injectors later and see what i find.
  4. C

    Stalling, Rough running, Rough shifts threw 22 code, replaced TPS no fix. Ideas?

    So I replaced it with a third sensor and still having issues. It now runs pretty good at idle in park and N but when you drop it into gear it bogs down and tries to die, very poor throttle response, and shifts hard and its all a intermittent problem. Im stuck... Somebody said it could be the...
  5. C

    Stalling, Rough running, Rough shifts threw 22 code, replaced TPS no fix. Ideas?

    And I should state that it is a semi intermittent issue. Sometimes it runs ok, but for the most part runs horribly ect
  6. C

    Stalling, Rough running, Rough shifts threw 22 code, replaced TPS no fix. Ideas?

    Have not, I dont have a obd1 scanner that can display values... It only displays code 22 which I just got off the flashes of CEL. Could I test it with a Multimeter? Once again I apologize kinda a newbie at wiring/auto electrical.
  7. C

    Stalling, Rough running, Rough shifts threw 22 code, replaced TPS no fix. Ideas?

    Ok so with the new path you posted its says if you jump 417 and 416 and it gets over 4.0 v then replace TPS sensor (it reads 5.3v), which I have done (twice actually the first sensor i put in immediately threw the 22 code, traded it in for a more expensive on from standard and still have the...
  8. C

    Stalling, Rough running, Rough shifts threw 22 code, replaced TPS no fix. Ideas?

    Any tips or tricks on how to track down wire short? I have very little experience, I do have a multimeter but not very well versed on how to use it efficiently
  9. C

    Stalling, Rough running, Rough shifts threw 22 code, replaced TPS no fix. Ideas?

    Thank you. I hate trying to find wiring issues but this may have made it easier. Buy a OBS they said, it will be fun they said...
  10. C

    Stalling, Rough running, Rough shifts threw 22 code, replaced TPS no fix. Ideas?

    Im not that great with electrical mechanical is more my thing, Im guessing 416 is blue 417 is grey? EDIT: Jumped 416 and 417 got 5.03 volts
  11. C

    Stalling, Rough running, Rough shifts threw 22 code, replaced TPS no fix. Ideas?

    I have tested the harness, Its getting 5 v and grounded just unsure if it is feeding back to ecu. And I did already replace TPS and it appears the Idle valve has also been replaced recently. I also noticed I am not getting continuity from the negative battery terminal to the frame... But do get...
  12. C

    Stalling, Rough running, Rough shifts threw 22 code, replaced TPS no fix. Ideas?

    Just bought this truck last week. Runs rough and stalls, doesnt like to idle, and when it runs rough it shifts horribly to. But sometimes it runs fine and the trans shifts smooth as can be. I checked the codes and it was code 22 for signal low/Short circuit. I replaced the TPS and of course got...
See more

Latest posts

Staff online

Members online

... and 26 more.
Total: 1,725 (members: 76, guests: 1,649)

Forum statistics

Threads
64,557
Messages
1,396,530
Members
51,995
Latest member
ccantrell

Share this page

Top