My fuel gauge reads well, it vibrates quite a bit but its pretty acurate.
I had read a thread about adding rc car oil to where the gauge needle sits to fix the erratic needle but I need to fix other issue that are more importante first
Here are my fuel trims
My truck had warmed up and I had...
Will take a look at them next time I drive. If i remember correctly, they are always negative numbers.
Anything fuel related won’t ship to CA. Fuel pumps being one of these items
I took my burb to a mechanic, I explained to him what was happening and when it was happening. He asked what all I had done and went through the list.
He asked about fuel pressure, gave him the numbers.
Compression, gave him the numbers.
He suggested my fuel pressure is low that's why truck...
Just the egr valve. I'll have to youtube the others, I've never seen anyone clean those
I have ran some lucas fuel injector maybe 1 month ago for a full tank and no change. Will fill up with 91 next time(Monday)
I know there is a Top Tier Fuel station close to my house.. gotta look it up. Saw...
Mine reads 160*. Once I changed the sensor(between SP 1 and 3), gauge needle jumped up to 195, and back down to 160. I had never seen it go to 195, so I believe its a defective motor in the gauge. if you have a scanner, verify temp and don't worry about the gauge
UPDATE
On a previous post a page back or 2 or maybe even 3, i had mentioned that I had driven to work with the 2 new spark plugs gapped at .045 and that the truck was misfiring, so before heading home i gapped both to .060 and the truck rode better.
Just for the heck of it, i checked another...
i checked the gap on the double platinum plug previously installed on cyl 4 and it was at 56. I gapped it to 60 and threw it back in cyl 4. Runs smoother, no cel yet, drove around the block and did some hard accelerations and no cel. Just seconds prior to pulling into drive way cyl 2 starts...
Whats the process of testing the injector?
Prior to intake installation, i tested for leaks with injector spider installed and I didn’t see any fuel leaking outside of its housing.