aj_08's latest activity
-
AOK. Build your fuse/fuseholder/switch/additional wire as needed exactly as before. Instead of using blade terminals jammed into the...
-
Aaj_08 replied to the thread Kill switch, 1997 k1500 pickup.Additional info that is very useful. Will look into this to prevent cutting/ molesting the original wiring harnesses. Thanks for this...
-
AThe yellow-circled fuse and fuse socket IS the opening in the circuit you need. Don't cut any wires, don't create any new hacktastic...
-
Aaj_08 replied to the thread Kill switch, 1997 k1500 pickup.Purple wire going from the crank fuse to the a/t range switch it is, and NOT the purple wire from the starter relay going to the starter...
-
AYes. To oversimplify, putting a given quality switch in the control side of a relay circuit = switch outlasts vehicle. Putting the...
-
AAh i understand what your saying too,
-
Aaj_08 replied to the thread Kill switch, 1997 k1500 pickup.So before or after the fuse is where we start to make our decision in which wire to use. In short, I guess you can cut the yellow wire...
-
Aaj_08 replied to the thread Kill switch, 1997 k1500 pickup.Amazing, I like this approach. Great write-up. I agree that the feed side of a relay that delivers power to the component, like a fuel...
-
AHello aj_08, 618 Syndicate has the best idea. Using the following wiring diagram from the Factory Service Manual, let's see what would...
-
Aaj_08 replied to the thread Kill switch, 1997 k1500 pickup.Ok, makes sense since the thick wire comes from the battery, whereas the signal wire is in the dash.
-
AInstall the button on the signal wire that goes to the solenoid
-
Aaj_08 replied to the thread Kill switch, 1997 k1500 pickup.Thanks. To clarify, you mean the power wire going to the starter which is of thicker gauge, or the signal wire that goes to the starter?
-
AInterrupt the starter wire with a normally open push button. Hide it somewhere within reach of the driver seat. Button must be pressed...
-
AYes I have a kill switch on my truck leading to the ignition coil wire, I have it on a relay to save the switch from burning out. Been...
-
Aaj_08 replied to the thread Kill switch, 1997 k1500 pickup.Yes, I see what you are saying. Good thing about the fuel shutting off mid drive is the truck will stop. Thieves may just ditch it...
