carzan
Newbie
The truck is a 1990 Silverado with a 5.7, automatic, 2wd.
It has two connectors.
It has two connectors.
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Remove the black plastic box and the aluminum block with the lines that's bolted to the bracket what your left with is an empty hole in the bottom of the valve on the master cylinder and the single rear brake line sticking up from the bottom. screw them together and bleed the rear brakes. If done correctly I can promise you the best brake your truck has ever had and you will never see the abs light again except at start up. I'll get some pics tomorrow showing how it works but just rip all that **** out and have amazing brakes like you think your truck should. No more spongy brake pedalThe truck is a 1990 Silverado with a 5.7, automatic, 2wd.
It has two connectors.You must be registered for see images attach
Remove the black plastic box and the aluminum block with the lines that's bolted to the bracket what your left with is an empty hole in the bottom of the valve on the master cylinder and the single rear brake line sticking up from the bottom. screw them together and bleed the rear brakes. If done correctly I can promise you the best brake your truck has ever had and you will never see the abs light again except at start up. I'll get some pics tomorrow showing how it works but just rip all that **** out and have amazing brakes like you think your truck should. No more spongy brake pedal