ccox
Newbie
I swapped a 10 bolt posi from a suburban into my 95 silverado. I replaced all of the brake hardware and have the 11"drums. When I am moving slowly I notice there is kind of a jerk, like the wheels are oval shaped. I also noticed one wheel is locking up constantly with the slightest braking. I looked up some info about it and a lot of people said its because of brake dust build up among many other things. I went to pull off the wheel yesterday to check and it was extremely hot. The drum was not sitting flush on the axle shaft. I pulled off the drum and there was a ton of dust. I cleaned all of that out, tightened the shoes up, and reinstalled the drum. The jerking and locking up isnt anywhere near as bad now, but still happens and it is pretty hot still. Is this just something that an adjustment would fix? I was thinking both sides would have issues if it were related to the axle swap, but its only one side. Any ideas what I should do?