CarolinaOBS
ZIP TIES AND PB BLASTER
Currently in the process of totally rebuilding the suspension on the gmc. 1.5" coil spacers, rancho rs5000s all four corners, energy suspension poly bushings for everything...EVERYTHING, moog ball joints and tie rod ends, and much more. Being very thorough with this one, doing the work myself in the afternoons has been a b####. Contemplating stealing the lift spindles off of the suburban to give the gmc 6-7" total lift so i can run 35s? Too much for a 2wd? Also new wheels came in, 20" 8 lug ltzs off a 2013 2500 duramax (yes i will be running adapters), waiting on rubber.
So far i have removed the whole front suspension, cleaned painted and installed all new bushings and ball joints. Upper control arm ball joints were fun for sure . Installed lower assembly on drivers side before i ran out of time today. This sH## is time consuming. It will be worth it, closer and closer every day.
So far i have removed the whole front suspension, cleaned painted and installed all new bushings and ball joints. Upper control arm ball joints were fun for sure . Installed lower assembly on drivers side before i ran out of time today. This sH## is time consuming. It will be worth it, closer and closer every day.