Sagging torsion bars....What are the symptoms of worn out torsion keys and/or torsion bars?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sagging torsion bars....What are the symptoms of worn out torsion keys and/or torsion bars?
...I guess I need to be more specific? My tbars may have always been worn out, and without a previous knowledge of how they should be, I have nothing to compare it too.Sagging torsion bars....
Having to crank the keys more to get the same amount of adjustment height is a symptom. Cranking them up to desired height, only to have them drop back down to the original height means they're completely wore out. What exactly are you dealing with?What are the symptoms of worn out torsion keys and/or torsion bars?
My key bolts are pretty much all the ways in, and my cv angles are damn near flat. That's cranking to be level with a 4" block :/. I've always associated worn out T-bar's with being bouncy though, and mine aren't bouncy at all. They have 0 bounce in them.Having to crank the keys more to get the same amount of adjustment height is a symptom. Cranking them up to desired height, only to have them drop back down to the original height means they're completely wore out. What exactly are you dealing with?
It must have Alot of rake doesn't it? You can't even crank to level with 4 inch blocks with brand new t bars.My key bolts are pretty much all the ways in, and my cv angles are damn near flat. That's cranking to be level with a 4" block :/. I've always associated worn out T-bar's with being bouncy though, and mine aren't bouncy at all. They have 0 bounce in them.
I'm trying to shake out my suspension issues if I'm going to keep this thing RE my build thread.
He has a 6" super lift in the frontIt must have Alot of rake doesn't it? You can't even crank to level with 4 inch blocks with brand new t bars.
Ah icHe has a 6" super lift in the front
I have a 95 k1500 with a 4inch pro comp lift running 15x14 welds on 33/12.5/15 replaced busing twice in the course of 3 weeks upper control arm bushing any advice? Or is this just a common chevy issuePost here if you have a simple question. This will help keep track of common info and reduce clutter.